You have no items in your shopping cart.
Tag Archives: tall office chair
When it comes to office chairs, there is no one size fits all solution. The right chair choice for an individual depends on a variety of factors such as height, weight, pre-existing pains or ailments, level of support needed, the height of the desk the chair will be fitting under, and more. As made evident, it can get somewhat difficult figuring out which chair will be the right fit for you, especially if you are on the taller side. If an individual is over six feet tall, even executive high back chairs may not provide the necessary back support which may lead to upper back neck and neck pain. There is also the seat depth that is an area for concern for taller individuals. If the seat is not long enough to fit the users thighs, this will not allow for correct sitting posture and will put more pressure on the knees and thighs. In order to avoid unnecessary pain and better yet, an unnecessary purchase, it is important if you are taller to determine which kind of office chair is going to work best for you. The term used to describe chairs for taller individuals is simply known in the office furniture industry as "tall office chairs", and it is a good place to start especially if your search will be taking place online.
When you first embark on your search for a tall office chair, the first thing you will want to look for is the chair's back dimensions. If you are looking for a tall office chair online, this can typically be found in the product information section or product specs area. All chair manufacturers take the time to take specific measurements of their chairs before they are released to the public in order to avoid returns being made because a chair did not fit a person properly. If the information is not readily available on the website you are looking at, call to inquire and the sales representative should be able to look up the information. Start by looking at high back or executive office chairs because typically these chairs' back heights are higher than managers chairs or task chairs. You will want a chair that will provide complete upper back support in order to avoid shoulder or neck pain. Have a friend use a tape measurer to measure your back from the top of your shoulders down to where you would be seated on the office chair. After you have that measurement, look for the back height on the chair of your choice and see if it goes a few inches above your back height. If the back of the chair is shorter than your back height, the chair may not provide the support you will need.
After you determine the ideal height for the backrest of your chair, your next concern is making sure your thighs will fit properly on the seat. The average seat depth on any given office chair is typically about 19 inches deep, however, if you are taller most likely this means you have longer legs. Longer legs requires a longer seat to ensure that your thighs will fit properly across the entire length of the seat without a lot of extra room between the back of your knees and the edge of the seat. Some high end chair manufacturers such as ErgoCentric Seating have a special upgrade option that allows the user to choose a longer seat of 21 inches deep. Another great way to solve the problem of having a seat that is too short is to look for chairs that have a seat slider option. A seat slider allows the user to adjust the depth of the chair by pulling up on a lever generally located underneath the front of the seat. When this lever is pulled up, you can then bring the chair forward or back to make the seat either longer or shorter depending on your needs.
The last step to ensure that your tall office chair will be the right choice for you is to determine the height of the cylinder on the chair. The cylinder is simply the device that allows your seat to move up and down. If a cylinder does not allow your seat height to go up high enough you may find yourself sitting at an awkward and uncomfortable angle. Ideally, you would want to sit with your feet firmly planted on the floor with your knees bent at a ninety degree angle. If your current chair you sit in now is at the proper height, measure the length of your leg from your knees to the floor. This will give you a good indication of how high your chairs' seat should go up to. If you simply can not find a chair with a seat range that does not fall within your height requirements, try opting to look at drafting chair options, as their cylinders are taller for extended height seating. Be wary of the height of your desk if you go for this option, because some drafting chairs will not fit under standard height desks. You may also want to look for chairs that come with different cylinder height options, again, some higher end manufacturers will carry this an upgraded option.
Although it may seem like there is no way that any chair could possibly fit all this criteria, fear not, because many manufacturers specifically design their chairs to meet the needs of taller individuals. Chairs designed for taller users will most likely have all three of the aforementioned features built into the design of the chair, rather than having to search for hours to find a chair that will possess all three. At Sitbetter.com, we are always ready to help our taller customers and have pre-selected chair options ready for you on hand. Just call our toll free number at 1-866-311-9421 or e-mail firstname.lastname@example.org to have one of our helpful customer service representatives assist you.